Listen for odd noises

Note any operator concerns
Listen for odd noises

Check for cleanliness
Note any operator concerns
Check PVC former
Listen for odd noises

Ensure all guards are in place
Check for cleanliness
Report any safety concerns
Note any operator concerns
Check sensors
Check PVC former
Check all fans are operating
Listen for odd noises

Inspect delivery chute
Ensure all guards are in place
Check heat box
Check for cleanliness
Check warp bar push rod nylon knuckle
Report any safety concerns
Check lamps of master & slave are ìonî
Note any operator concerns
Check belts & chains
Check sensors
Check clamps for tightness
Check PVC former
Check nuts & clasps are secure
Check all fans are operating
Check bag seal
Listen for odd noises

Clean nozzle area
Inspect delivery chute
Clean head assembly
Ensure all guards are in place
Clean & grease eccentrics
Check heat box
Apply grease to all nipples, then wipe off excess grease
Check for cleanliness
Grease nip drive rollers
Check warp bar push rod nylon knuckle
Grease post bearings
Report any safety concerns
Grease pillow blocks
Check lamps of master & slave are ìonî
Check hardened brushings & lubricate
Note any operator concerns
Drop of oil on chain
Check belts & chains
Check impeller is properly mounted on the shaft
Check sensors
Check screw weakness, then drive home
Check clamps for tightness
Check tightness of screw
Check PVC former
Check & record clamp pressure
Check nuts & clasps are secure
Check & record pump pressure
Check all fans are operating
Check & record ram pressure
Check bag seal
Check & record screw pressure
Listen for odd noises

All sensors working?

Disconnect, disassemble, check, sanitize, & reassemble piston & cylinder
Dismount horn & clean
Replace filter & diaphragm if necessary
Craft packing stripper & rewind

Listen for odd noises